ADAMEC CRANE SYSTEMS – YOUR RELIABLE MANUFACTURER AND PROVIDER OF CRANES, CRANE EQUIPMENT, CRANE RUNWAYS AND HOISTS

News



Underslung crane with three end carriages

19.08.2020

<p>According to the customer's wishes, we replaced the old worn crane with a new Adamec Crane Systems crane. The crane is designed as an overhead type. A special feature is the use of 3 end carriages.</p> <p>The construction of the crane was adapted to the existing underslung runway. Our delivery was, as always, management of turnkey contact.</p> <p>Thus, it contained all the necessary work for putting the new crane into operation, such as: geodetic survey of the crane runway, accurate measurement of the passage profile and crane runway profile, comparison of the crane runway, assembly and connection of the crane and commissioning with all necessary documents for the crane.</p> <p>The crane consists of a wire rope hoist, end carriages and their drives from Stahl, other components are our own design.</p> <p><img title="vces" src="/data/upload/image/_1.jpg" alt="underslung crane" width="1600" height="900" /></p>

read more

Overhead travelling crane with portal extensions

30.04.2020

We supplied CPOS, a company engaged in the production of large steel weldments a special overhead travelling crane with portal extensions.

read more

Kajima, Czech Republic

18.10.2019

<p>Due to new trends and technologies in the production of automotive lighting, the leading Japanese company has decided to expand its production with a new hall. We participated in this project when we delivered and installed 5 new cranes with a load capacity of 20 t including crane  runways and service bridges, in the new hall. In addition, we also supplied one smaller crane and 14 crane runways with mobile hoists. The investor places great emphasis on safety and also because, at the customer's request, the dominant feature of cranes is the large inscription "SAFETY FIRST".</p> <p><img title="ACS Groove" src="/data/upload/image/IMG_20200324_100426_1.jpg" alt="groove" width="1440" height="1080" /></p>

read more

Bumper Stiffness Measurement in the Laboratory of CTU Prague

30.04.2019

Bumper Stiffness Measurement in the Laboratory of CTU Prague

On April 5, 2019, we measured the rigidity of the bumpers of our cranes in the laboratory of the Faculty of Civil Engineering of the Czech Technical University in Prague.

read more

Special crane with rotating crab for Prefa Praha

24.10.2018

Special crane with rotating crab for Prefa Praha

The company Prefa Praha is one of the largest manufacturers of concrete beams in the Czech Republic. We have already supplied many cranes to Prefa Praha. It is a very heavy crane operation, manipulation with finished concrete beams. In particular interest is a special crane 10t + 10t with rotating crab.

read more

THE NEW CRANES TO SWEDEN

09.05.2018

Adamec Crane Systems has won the tender for delivery of cranes with lifting capacity of 120 t, 25 t and others for Swedish chemical company.

read more

THE NEW PROCESS CRANES IN THE BIGGEST BUS FACTORY IN CZ JUST FINISHED!

25.09.2017

Adamec Crane Systems had been supplied in total 12 cranes including 6 overhead travelling bridge cranes and 6 underslung travelling bridge cranes to the reconstructed welding plant

read more

INSTALLING NEW CRANES IN SWEDEN

28.11.2016

Köping in Sweden is currently under installation of our cranes to a new plant for production of nitric acid with production capacity of 685 tons per day! The company Yara International will use our four new cranes, the largest of which is the ACS 120 t + 16 t / 12.4 m. The other cranes ACS ...

read more

DELIVERY OF CRANES AND CERTIFICATION FOR RUSSIA

14.03.2016

We just finished the production of cranes 40 t, 16 t as Ex Proof and 8 t to the Russian Federation. Along with this we have reached a certification for a long-term supply of classic and explosion-proof cranes for export to the Russian Federation.

read more

INSTALLATION IN LIBERIA COMPLETED

20.02.2016

For a major Czech company Hydropol, we delivered and installed a double girder overhead crane carrying capacity of 35 tons a span of 8.9 meters including a crane runway length of 20.4 meters, which will be used for handling water turbine in the hall of hydroelectric power plant in Liberia. ...

read more

ADAMEC CRANE SYSTEMS NEW WEBSITE

07.12.2015

Dear customers, welcome to our new website. We believe it will enable us to improve the communication with you, including easy input of your inquiries.

read more

CRANE FOR LIBERIA

07.12.2015

We are working on the implementation of the 35-ton crane, which we are giong to mount in Liberia in January.

read more

18 cranes

06.12.2015

For our customer, Swietelsky company, we are just producing 18 cranes for their client from Strakonice.

read more

WE GROW!

18.08.2015

Due to the growing interest in our cranes a new designer Jan Hajek joined our team. 

read more